TiltLander is a simple project to demonstrate accelerometer use in Android. It's just the Android Lunar Lander demo, with the accelerometer hooked up to control the tilt of the lander.
How to play
You have to land the lander on the landing pad, which is shown as a green line at the bottom of the screen. (The actual position changes at random.) Sounds easy, but:
* You must be moving slowly -- see your speed at the top middle of the screen
* You must be reasonably level
* You must be completely on the landing pad
You can control your descent by firing your engine. The engine always pushes you in the direction you are pointing, so by tilting the lander, you can also control your side-to-side movement. But watch out -- fuel is limited. Your fuel state is shown at the top left of the screen.
You can fire the engines by pressing the trackball button or touching the screen; control the angle of the lander by tilting the phone. But note: rotating the lander does nothing in itself; to move sideways, you need to point in the direction you want to go and fire the engine.
What's New in This Release:
· Allow install to SD card.
Like it? Share with your friends!
Supported operating systems:
Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
Android System Information Android System Information is utility can view the system properties information, java vm application properties information, linux environment variables and the device's hardware information, so you can check the phone's software and hardware's properties with this application
AppsInstaller Install apps from your SD card with this utility. Users installing non-market apps no longer have to use the G1 browser to find/install an .apk. Apps not compiled on SDK 1.0 (any app released prior to Sept 23rd, 08) won't work, since they don't work on Android period
UUcleaner_Speed&Battery Boost UUcleaner_Speed&Battery Boost - Does getting more apps cause lagging and battery drainage on your device? Are you tired of a full internal memory due to apps running in the background with frequent push notifications?
We have a SOLUTION for you! With UUcleaner, unused apps will be hibernated until you manually start them
Quick System Info Quick System Info - all detailed information on the state of your device in one application. Track processor and RAM load. View all list of applications and number of active processes. You can get gyro sensor and battery data on new devices
System App Remover System App Remover - is a utility which will help you edit, clear and remove applications. Safe filtering will not let you remove important system applications. Application clearing will help you save much free memory space. Administrator rights are required for stable work
WRW (Work Registration Widget) preAlpha Build The WRW (Work Registration Widget) enables Android users to press a button every time they start/stop working. This button is just available on one of your Android desktop-pages, so always close and easy to access. Every button press is registered so afterwards you can ask for a detailed view of all your work-registrations
CPU Booster CPU Booster - The best way to increase the CPU productivity of your phone, tablet or any other Android based device.
CPU Booster completes dynamic CPU Overclock in conformity with the processor’s temperature. The CPU productivity depends very much on it’s working temperature, so when the temperature is increased, the productivity is reduced
Powerful System Monitor Powerful System Monitor - is a system monitor which gives the information on all components of your device. The application shows current state of the battery, RAM and system memory. It is tracking frequency and temperature of the processor in real time mode and supports monitoring of multi-core chips
Other Software by developer «Moonblink»:
TouchTest TouchTest is a simple Android application to test screen parameters and multi-touch.
The application displays a 50-pixel grid which illustrates the screen sizes, and edge markers to check the registration of the screen edge with the surrounding bezel
Tricorder Tricorder - A simple tricorder simulator for Android powered phones, using real sensors to detect magnetic fields, gravity, etc. See the passing gravity wave from a distant collapsar on your phone screen (actual device sensitivity may be insufficient to detect gravity waves). Detect buried powerful magnets! Be a mega-geek! Etc
Test Card Test Card - A very simple screen test card for Android. Designed to allow you to view the structures of pixels under magnification. On many phones this will be totally uninteresting; on some, notably AMOLED displays, it may be more useful. Please read the help for more info
TestCard TestCard is a simple screen test pattern for Android devices.
The app displays test patterns which are intended to let you see the structure of individual pixels, and the effect that has on the overall quality of the display. On many devices, the display will be utterly uninteresting
Substrate Live Wallpapers A set of live wallpapers, each displaying a slowly changing pattern which gradually evolves in your home screen
Scrambled Net Scrambled Net - NEW: personal high scores, animations, and auto-solver. See menu to turn animations off. You are given a computer network with the connections all scrambled; rotate the tiles to connect all the terminals to the server. See if you can make your way through the 5 difficulty levels. Please see the in-game help
Substrate Substrate - This application contains a collection of live wallpapers for Android. Once installed, you can install any of the wallpapers on your desktop in the usual way. The package also contains a runnable application which previews all the wallpapers and provides access to their settings
Dazzle Dazzle is a configurable switcher widget for Android devices; it allows you to create one or more switcher widgets, in four sizes, with your choice of controls. You can choose from WiFi, Bluetooth, GPS, airplane mode, and brightness controls; on supported devices, brightness lets you toggle between auto and manual modes.
· Four widget sizes
ScrambledNet Lite (Android) ScrambledNet is a port of the KDE game "knetwalk", by Andi Peredri, Thomas Nagy and Reinhold Kainhofer.
The player is given a network diagram with the parts of the network randomly rotated; he/she must rotate them to connect all the terminals to the server.
· Portrait and landscape modes are handled
