SmartProtect helps you track and recover your phone once stolen or lost.
Features includes:
1. A Thief or Lost Prevention Software with SMS Auto-Responder and GPS Capability created for Windows Mobile Devices.
2. When you forget your phone and can''t remember where you put it, you can SMS your phone to get the exact location via GPS information if your phone has GPS Capability or approximate location based on Cell Location.
3. You can SMS your phone for other information such as IMSI, IMEI or even remotely reboot your phone etc.
4. This software is also equipped with Thief Prevention system which will automatically SMS your partner phone number if the SIM has been changed against the registered SIM.
5. This software supports registration of Multiple SIM Cards and of Multiple Phone Conctacts as Partners.
6. When your phone has been stolen, it will automatically SMS relevant information such as IMEI, SIM Card Number or IMSI, GPS Location if supported or Cell Location.
7. It is able to also auto-delete Phone Memory Contacts if the phone has been stolen.
8. It is password protected and the password is encrypted with AES-Encryption.
9. Its un-install proof. It requires special procedure to uninstall the protection, so even if you uninstall it, it is still working.
10. It has MortScript support.
Note that Cell Location depends on your device. It should be working but the problem is not all devices interfaces with RIL functionality so it may or may not work.
For testing, kindly use Emulation Mode to determine if the application will work on your phone before using these features:
1. Make Phone Unusable
2. Protected Folders
3. Delete Contacts on SIM Change
Emulation mode will run the protection, however on test mode only and not real mode. Therefore, it will just produce a log file to tell you of the action it is supposed to make (however since its a test mode, it does not do that action). If everything is fine, make sure that after testing, to disable the emulation mode.
This software also can accept SMS Commands from the partner phone so that it can return informations as commanded by you explicitly. Here are the SMS Commands that you can send. Note though that the SMS is only accepted when :
1. The SMS came from a partner phone. (You need to register the phone as a partner phone first).
2. The password is correct. Password is based on the password that you have saved when you configure SmartProtect on your phone. The password is authenticated by the phone once the SMS Command is received.
3. When the SMS Command is correct.
The SMS commands syntax is:
::/[command],[password]
example :
::/getGPSLocation,mypassword
Available Commands are:
getIMEI - Retrieves the IMEI Number
lockMyPhone - makes your phone unusable
enableLockPhone - Enable the Lock Mechanism of your Phone. When your phone is stolen, your phone will become unusable.
rebootPhone - Reboots your phone.
deleteContacts -Deletes your mobile phone contacts. It does not delete the SIM Card Contacts.
unregisterPhone - Unregisters the sender as a partner phone.
disableSecurity - Disables the security mechanism of your phone. This requires restart to take effect.
enableSecurity - Enables the security mechanism of your phone.This requires restart to take effect.
getIMSI - Retrieves the IMSI Number.
alertContacts - alerts your contacts that your phone has been stolen.
getCellLocation - Gets the approximate location based on Cell Tower that your phone has registered to.
getGPSLocation - Retrieves the GPS Coordinates.
exitApp - When you use getGPSLocation command, this application stays in the memory. This command exits the application. However, this applications will still be activated if any of the command is received.
registerPhone - Registers your sender as partner phone number.
listCommands - List the commands available for the Software.
versionInfo - Retrieves the current version of the SmartProtect.
deleteProtectedFolders - Removes the protected folders.
disableEmulation - Disabled the emulation mode.
stopAlert- Stops the alertContacts action.
stopAlert- Stops the alertContacts action.
runPreScript- Runs the pre-action MortScript you've defined.
runPostSCript- Runs the post-action MortScript you've defined.
runAllScripts- Runs all the MortScripts you've defined.
Please follow the procedure below to update the software:
1. From the partner phone. SMS your phone with the command ::/exitApp,[password]. This is to make sure that the SMS module is not loaded in the memory or update may fail.
2. Uninstall the SmartProtect. (optional)
3. Install the latest SmartProtect. If you didnt uninstall SmartProtect, it will ask you if you want to uninstall the older SmartProtect. Just click.
4. Once installed, Run SmartProtect to verify that your settings is still there.
5. Once verified, click either exit or save.
6. You will be notified that there's a need to restart the phone. Proceed to restart.
7. To verify its installed, SMS your phone with ::/versionInfo,< password >. This should yield the latest version.
Please follow the procedure below to remove the software:
1. Uninstall SmartProtect from your Mobile Phone.
2. From the partner phone. SMS your phone with the command ::/exitApp,[password]. This is to make sure that the SMS module is not loaded in the memory or update may fail.
3. Install SmartProtectRemove.CAB to your mobile phone.
3. Run the SmartProtectRemove
4. Enter the appropriate password you've configured for SmartProtect. Click on Remove SmartProtect.
5. Reboot/soft reset your phone.
6. To verify that it has been removed, SMS any commands to your phone. It should get thru now.
THOSE WITH SMS MODULE OF SMARTPROTECT NOT WORKING
Kindly run SmartProtect on Emulation Mode and test by sending SMS commands. The emulation mode works for all commands except for disableemulation, versioninfo and listcommands. Then the resulting log, kindly send to me for debugging purposes. Note that in emulation mode, no SMS will be sent out and all actions are recorded on the log file
What's New in This Release:
· Removed Debug Statements.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Pocket PC 2002, Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
VITO ActiveTrace VITO ActiveTrace is a sports oriented software specially designed to help you watch your sports progress. VITO ActiveTrace turns a Smartphone into your personal coach that accurately keeps detailed statistics for every trip and also records corresponding tracks. Just turn VITO ActiveTrace on, put your device in a pocket and concentrate on training
FileGPSed FileGPSed - FileGPSed allows browse and view GPS tagged Excel, Word, Note, Voice, Text and Picture/Video files. You can browse the folders of the PocketPC for GPS tagged files and view them via GPS distance from your current location. Tap on the file to open it in the associated application.
This program requires that you have both the 'BeanDLL
BackCountry Navigator BackCountry Navigator is fun-filled navigation software for the outdoor adventurer. Use it in a variety of outdoor adventures, from kayak touring to geocaching. This is a summary of what you can do with the product.
BackCountry uses free topo and aerial maps for the United States, downloaded directly from Terraserver-USA
FON Access Points for Thailand FON Access Points for Thailand - FON offers you a new Points of Interest service (POIs). This allows you to download FONspots directly to your navigation device.
What does that mean? You can download a Points of Interest file directly to your navigation device
GPS Videorecorder GPS Videorecorder is an Animation and Analysis Software for GPS Data. The Software can be used in the same way as a Videorecorder with Play, Record, Rewind and FastForward. Furthermore you can add handwritten notes to the video and measure distances and areas. A Geocashfinder and an interactive help are also part of the program
PictureGPSings PictureGPSings - PictureGPSings can be used when you want to describe a set of pictures/videos from your camera and GPS information. Enter the text to place at the end of the images and the text will appended to the end of the images/videos taken with the GPS information.
This program requires that you have both the 'BeanDLL
Cachebox Cachebox is a geocache database for Windows Mobile devices. To use it you need GPX files available from geocaching.com
· Optimized for touch displays and fingertips, so leave your stylus where it belongs!
· You don't have a mobile internet connection? Fetch all data you need and store it on your device!
· Handles large amounts of data
Locify With Locify you can explore interesting places near you from Wikipedia, seek for geocaches, display map where you are (or you want to go), twitter your location, save interesting places from phone or web sync them and even navigate to them... and much more.
Locify is free application for common mobile phone
VirtualGPS Virtual GPS is a free, small utility, which fully emulates GPS module and returns your location (by using cellular towers).
Accuracy of coordinates is about 200m in urban area and up to 5km in countryside. Screenshots are explaining how to use VirtualGPS with navigation software (e.g. "Google Maps")
GridHIKER GridHIKER-software for handheld units. A step further than raw numeric coordinates.
Recommended for paper map enthusiasts requiring determining his position. GridHIKER shows position graphically on usual Geographic grid or UTM grid which should be drown on paper map.
Features:
- Displaying Geographical grid for position between Lattitude -80S and 84N
Other Software by developer «James Larry Gaines»:
not found
Comments on SmartProtect:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
SmartProtect is compatible with your device RoverPC G6