Battery Monitor gives you quite an exact power consumption profile of your Pilot. BM monitors the total ON-time, how long the backlight (if you have one) was used and how long the serial port was active. If you're a user of Eco Hack, BM will also tell you, how much percent you saved by using Eco Hack. But that's not all: From the collected data, BM calculates the used energy and tells you, how much percent you spend on each of the functions. Since BM also detects automatically when you changed batteries, it stores the date and a complete previous consumption profile. From the total time the batteries are in use, BM also calculates, how much of your batteries are used while your Pilot is 'sleeping'. BM has a 3 week full functional trial period.
· 3 weeks trial
What's New in This Release:
· - Added a new setting for TRG's new SPII-XL 8MB memory board (BTW, a phantastic piece of hardware!). - Finally the export function is implemented. You can save your battery data in the memo pad now. - Changed the total time-in-use display. It now has the format days:hrs:min:sec, alot of people asked for it - well, now you got it.
Like it? Share with your friends!
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
BatteryTrace BatteryTrace can monitor your battery life
Charge Charge - La Charge de batterie s'affiche partout a l'aide d'une simple ligne coloree sur votre palm dans toute fenetre plein ecran (320x320).
Vous avez la possibilite de choisir l'emplacement (top, bottom, left, right) et la couleur de cette ligne
BatLight BatLight - The PowerLED is the forgotten feature on a m5xx. BatLight makes this feature useful.
BatLight is a program that links the battery level to an LED action. With BatLight active you can see whether the battery is below a defined level or/and when the device is attached to a cradle/travel charger and whether it is charged or charging
BatteryLineHack Battery charge displayed anywhere by a simple colored line
Energy Saver for Kyocera 7135 Energy Saver for Kyocera 7135 is a program that saves battery life on the Kyocera 7135.
One of the major shortcomings of this phone is that it searchs forever if it has no signal, which causes a serious battery drain. In order to save battery, the 7135 should turn itself off after a preset amount of time with no signal
Battery Estimator for Palm OS Battery Estimator for Palm OS - This program checks your Palm's battery level and converts it into an estimation of how long your Palm's battery will last based on a calibration to your specific device.. It is also Multitasker-enhanced, so you can see how much power you have left in any Multitasker application.
NOTICE:This application requires Multitasker 0
Michau's Battery Meter Michau's Battery Meter is probably the only PalmOS utility that tells you how long your battery will last until you need to recharge it. Need to use your PDA for a long time without a charger? Check if your batteries won't dry out before you finish your work!
Another feature is the battery icon in menu bar
PowerOn for Palm OS Is your battery life too short? Is it draining out too quickly? Do you want to stop unwanted power on and data corruption and lost? PowerOn is the power saver tool for you. It increases battery life by preventing unwanted power on and auto-dimming your sc
StayOff StayOff is an application that prevents your PalmOS 4.0 or greater device from waking due to accidential button presses. This application is based on the very popular StayOffHack however it is now is a stand alone application to support PalmOS 5.0 which does not support HackMaster. For PalmOS devices running a version of PalmOS older than 4
BatteryGraph BatteryGraph is a program for monitoring battery status on a PalmOS compatible device.
Every time you switch on or off your device the program will log the current battery status in a database.
On the main screen the battery percentage and voltage over the last few days will be drawn as a line in a graph
Other Software by developer «Peter Strobel»:
Voltage Calibration Voltage Calibration - Do you think the volt meter in your Palm is way off? Are you changing your batteries too early? You have a digital voltmeter? Or at least a friend with a voltmeter? Try out Voltage Calibration then.
It allows you to compensate the error of the internal voltmeter of any Palm (works for all OS)
Voltage Display Do you miss a digital readout of the battery voltage in the default app laucher? Voltage Display does exactly that
