No Streak Hack - Some Palm IIIx displays have the 'streaking' problem. They tend to extend vertical lines (can be seen in the datebook month view) . Sometimes this can be adjusted by reducing the contrast using the contrast adjustment wheel.
This problem can sometimes be solved with software by changing the display refresh frequency. The PalmOS 3.1.1 upgrade and other programs cure this.
Flickering greyscale on the Palm IIIx and Handspring Visors
In order to prevent streaking, the PalmOS 3.1.1 upgrade and all later OS versions for the Palm IIIx and some old models of the Handspring Visor (not the prism or the platinum) reduce the screen refresh rate like this hack does.
Reducing the refresh rate has one major disadvantage: Greyscale pixels are generated by turning the pixels on and off very fast by the video controller. Together with the reduced screen refresh rate of the Palm IIIx and some Visors, this causes visible flicker in greyscale video modes used by some games and e.g. programs like AvantGo.
It is possible to setup nostreak to disable the anti-streaking code in these OS versions. In order to prevent flickering greyscale modes in e.g. programs like PalmBoy on the Palm IIIx and the Handspring Visor, install nostreak, start the hackmaster application, go to the nostreak setup (the small '+') and set the refresh rate to '0' and select 'enable in greyscale mode'. After that you might need to re-adjust the contrast setting, but the flickering in greyscale applications will be gone.
This disables the anti-streaking features of PalmOS and you might see streaking on your Palm IIIx or Visor after this. There is no way to reduce streaking and to avoid flickering greyscale at the same time.
What's New in This Release:
· Version 1.3 can be activated for greyscale modes separately
Like it? Share with your friends!
Requirements:HackMaster
Supported operating systems:
Palm OS 3.x, Palm OS 4.x, Palm OS 5.x
Similar Software:
Zire71 BackLightOff Zire71 BackLightOff - allows you to toggle the backlight of your Zire 71. In order to reactivate backlight relaunch the app or simply adjust brightness as usual.
What's New in This Release:
· Relaunching the app reactivates backlight again
Backlight On Backlight On will turn on the backlight of your m505 every time you turn your Palm on.
Backlight On differs from the "official" Palm app in several ways:
-There is never any user interface. It just works, and doesn't need to be configured.
- It is much smaller (under 1Kb).
- It turns on the backlight everytime the m505 is turned on
ScnCalibrate Program for recalibrate the digitizer with one click
myDimmer myDimmer is the ultimate backlight brightness controller for your Palm, save your battery power while using your device in the day, and save your eyes, while reading in the dark.
Free Registration Code: 3356758
Rotation Rotation - The Rotation utility allows you to switch display orientation on square PalmOS 5 devices. You just have to define a rotation trigger key in the preferences panel.
Please try the demo version before buying to make sure that the utility works with your programs.
Both .prc files should be installed
IIIcLight IIIcLight is a small utility that, when run, turns your whole screen white (colour models) or blank (other models).
This allows you to use your Palm as a torchlight.
For non-colour models, simply run the program and turn on the backlight.
This works best if your Palm has an old-fashioned style backlight
Lamp Lamp only displays a never-ending white screen which has no value expect that it can be used as a backup lamp. At the bottom of the screen, the battery percentage level is displayed.
No parameters, no special features - excepts that UP and DOWN buttons can be used to increase/decrease brightness. Tap on the screen to exit the application
Lightswitch for Palm Lightswitch for Palm is a software control for switching the backlight off and on.
This is faster and easier than holding down the power button.
For PDA's not fitted with a backlight, it lets you adjust the brightness.
What's New in This Release:
· Explicit turn backlight on ond off buttons
· Show backlight status, whether off or on
ReDigi ReDigi - ReDigi helps you to access the digitizer screen when your pen is severely misaligned.
Calibrate after a soft reset - Normally, after a soft reset, the Prefs screen will appear. With ReDigi, the calibration screen will show after a soft reset. This allows you to calibrate the digitizer
PalmMirror This is a simple mirror for palm and Sony Clie
Other Software by developer «Till Harbaum»:
Argon V Argon V - Your objective is to survive as long as possible and to shoot down everything that moves. Avoid to crash into buildings, energy barriers, bombs and other ships, since this will damage you shield. Try to collect upgrades to increase the ship strength or to reduce damage
BlueBlocks BlueBlocks - BlueBlocks is the first real multiplayer Bluetooth game for PalmOS. It uses a so-called piconet to connect up to four palm PDAs into a bluetooth network. These four palms can then join each other in a multiplayer session of BlueBlocks.
The game has been developed and tested with a PalmOne M515 and a PalmOne Tungsten T
Mobile25 Mobile25 is a mapping application. It was meant to be used on our geocaching trips. The maps are stored as compressed bitmaps on memory card and e.g. the 1:100.000 (TOP100) and 1:25.000 (TOP25) maps of Baden-Wurttemberg, Germany together require about 700MB of memory card space.
Mobile25 supports bluetooth GPS devices and can display the current GPS position on the map
IR Ping IR Ping - This program allows to check the communication between a Palm III or a PalmPilot Professional with IrDA extension and other IrDA devices or another PalmPilot. The current version tries to access a IrCOMM port. This is present in most printers and Palm devices with PalmOS >= 3.3
Real Freedom Real Freedom is a converter for Phoinix cartridge images. It can convert images from the format used by the Gameboy emulators Liberty (commercial) and Phoinix/PalmBoy (free) and gameboy cartridges stored on SmartMedia using the axxPac into the Phoinix format.
Currently the converter creates a blank RAM image for cartridges with built-in RAM
PBrick PBrick - The PBrick library provides a API for bidirectional IR communication between the palm computing platform and the lego mindstorms RCX controller
Step Counter Step Counter - This program needs the tilt sensor modification to work, it uses the acceleration sensor to count your steps while walking or jogging.
Just start the step counter application and put the pilot into your pant pocket or whatever you like. The sensitivity can be adjusted to match the different accelerations while walking, jogging or running
Battery Meter Hack Battery Meter Hack - This program replaces the battery symbol in the PalmOS launcher application with a customizable symbol and an additional value. This value can be configured to display the absolute battery voltage or the battery level in percent
