DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Magnet unlocker Magnet unlocker - is an application which offers different ways of smartphone unlock. You can unlock your device by means of shaking, while connecting dock or connecting power supply. The deviced will be locked if you disconnect dock or power supply correspondingly
Flash Light: Bright LED Torch Flash Light: Bright LED Torch - Description
LED Flashlight Energy Saving app The fastest startup super smart flashlight light app with Smart Camera Flash LED technology for your Android device
Dimify - Screen Filter Dimify - Screen Filter - I believe nobody today goes to sleep before at least half an hour of phone browsing , gaming , reading e-books or just chatting . Dimify is developed to provide filters which can reduce the negative effects of using devices in dark light and allow to lower the brightness below the default implementation of android
Firmus Utility Firmus Utility - Free version of Firmus Utility. Includes all the same features as the pro version, but with ad's. This application allows you to use the torch feature of your phone. It includes both battery and torch widgets. This application also includes a barcode scanner that can send barcode data to a host computer over Bluetooth or WiFi
Lamp (Android) Lamp is designed for temporary lighting or is used as a flashlight. It includes there lamps that you can turn on or off by touching the screen. You can adjust the high, middle and low brightness level
High Flashlight Torch High Flashlight Torch - This is a Torch Application for your mobile anyone can use their camera flashlight as a torch with this application. You can use this app when you in need to find something in dark place just simple one click on icon
NoSleep Simple widget which allows you to keep your Android awake all the time
Auto Lock Unlock Ad Back in the old days when smart-phones are not the rage yet, the phones we have usually have those keypad lock mechanism. It help to prevent accidental press of buttons on the phone when we tuck our phones into pockets or bags etc
Other Software by developer «leppie»:
not found
Comments on DHD Proximity Sensor Recalibrator:
papa beat:
I hope it wprks
Date: 9 Oct 12
HKG:
This app doesnt work with Sony Ericsson Arc S. Error: "Kernel not supported" -ps_kadc not found.
Date: 9 Nov 12
anil:
sensor
Date: 10 Dec 12
Jawad:
his app doesn't work with sky vega a830L Error: "Kernel not supported" -ps_kadc not found.
Date: 30 Apr 13
jpmurf:
Doesn't work on LG G2 D800 "Kernel not supported" -ps_kadc not found.
Date: 5 Aug 14
deepak:
in lava xolo a600 "Kernel not supported" -ps_kadc not found. same issue
Date: 7 Dec 16
If you noted an error or download link is broken, please, report it via this page or use comments.
DHD Proximity Sensor Recalibrator is compatible with your device Meizu 15 Dual SIM TD-LTE CN M881Q 64GB
