TiltLander is a simple project to demonstrate accelerometer use in Android. It's just the Android Lunar Lander demo, with the accelerometer hooked up to control the tilt of the lander.
How to play
You have to land the lander on the landing pad, which is shown as a green line at the bottom of the screen. (The actual position changes at random.) Sounds easy, but:
* You must be moving slowly -- see your speed at the top middle of the screen
* You must be reasonably level
* You must be completely on the landing pad
You can control your descent by firing your engine. The engine always pushes you in the direction you are pointing, so by tilting the lander, you can also control your side-to-side movement. But watch out -- fuel is limited. Your fuel state is shown at the top left of the screen.
You can fire the engines by pressing the trackball button or touching the screen; control the angle of the lander by tilting the phone. But note: rotating the lander does nothing in itself; to move sideways, you need to point in the direction you want to go and fire the engine.
What's New in This Release:
· Allow install to SD card.
Like it? Share with your friends!
Supported operating systems:
Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
CPU Booster CPU Booster - The best way to increase the CPU productivity of your phone, tablet or any other Android based device.
CPU Booster completes dynamic CPU Overclock in conformity with the processor’s temperature. The CPU productivity depends very much on it’s working temperature, so when the temperature is increased, the productivity is reduced
App Control App Control is a tool that displays detailed information about apps present in your device.
App Control is very easy to use, just click on the desired app to get detailed information about it. See how much storage space your apps are using. App Control can even identify uninstalled apps that are still using precious storage space
Andevice Andevice is an intuitive app which shows commonly needed information about your Android device and its state
SysInfo Tool SysInfo Tool - SysInfo is a very useful utility that lets you view important information about your system. This application show all processes running on your device. Tapping one of the processes displays detailed information and you can also kill running applications
Android System Cleaner The most convenient system cleaning tool! Function: Clear the cache for all applications Clear System process
SeePU SeePU shows the current CPU utilization and free RAM in the notification area.You can easily see whether your processor is being heavily taxed - and for example let it finish its job without burdening it further - or is sitting happily idle, ready for action
My paid app My paid app - is a manager of applications bought from Google market. This application will remember and sort out paid applications and will make the work with market easier for a user in this way
Synodroid Pro Synodroid Pro - allows you to manage Synology NAS downloads from your Android phone via both WiFi and 3G.
Pro version includes a revamped user interface with native Honeycomb and Ice Cream Sandwich support, background service for file transfers, XHDPI Native support, and more
OverclockWidget (Need Root) OverclockWidget (Need Root) - It can help you make the CPU run as your wish and monitor the current CPU speed. It can be a speed monster, or a battery saver. It runs similar to setcpu, and when full speed, can speed up your game performance, such as Angry Bird, Cut the rope, Fruit Ninja etc... when set to lower freq, it can enlarge your battery life
Other Software by developer «Moonblink»:
TouchTest TouchTest is a simple Android application to test screen parameters and multi-touch.
The application displays a 50-pixel grid which illustrates the screen sizes, and edge markers to check the registration of the screen edge with the surrounding bezel
Tricorder Tricorder - A simple tricorder simulator for Android powered phones, using real sensors to detect magnetic fields, gravity, etc. See the passing gravity wave from a distant collapsar on your phone screen (actual device sensitivity may be insufficient to detect gravity waves). Detect buried powerful magnets! Be a mega-geek! Etc
Touch Test Touch Test - Shows display parameters, multiple touch points, and trails to let you see how linear your touchpanel is. Different hardware supports 1, 2, or more fingers -- see which yours is. Note Android before 2.0 supported only single touch. Please see the help for more info
Scrambled Net Scrambled Net - NEW: personal high scores, animations, and auto-solver. See menu to turn animations off. You are given a computer network with the connections all scrambled; rotate the tiles to connect all the terminals to the server. See if you can make your way through the 5 difficulty levels. Please see the in-game help
Dazzle Dazzle is a configurable switcher widget for Android devices; it allows you to create one or more switcher widgets, in four sizes, with your choice of controls. You can choose from WiFi, Bluetooth, GPS, airplane mode, and brightness controls; on supported devices, brightness lets you toggle between auto and manual modes.
· Four widget sizes
Substrate Substrate - This application contains a collection of live wallpapers for Android. Once installed, you can install any of the wallpapers on your desktop in the usual way. The package also contains a runnable application which previews all the wallpapers and provides access to their settings
ScrambledNet Lite (Android) ScrambledNet is a port of the KDE game "knetwalk", by Andi Peredri, Thomas Nagy and Reinhold Kainhofer.
The player is given a network diagram with the parts of the network randomly rotated; he/she must rotate them to connect all the terminals to the server.
· Portrait and landscape modes are handled
Dazzle Configurable Switcher Dazzle Configurable Switcher - The ultimate switcher bar for your phone. Choose from 4 widget sizes, and choose which controls it shows: ringer, sync, WiFi, BT, GPS, airplane, or brightness with min/max/preset (and auto toggle on some phones). Now with both one-touch and popup controls. WIDGET, NOT AN APP: you have to install it on your home page
TestCard TestCard is a simple screen test pattern for Android devices.
The app displays test patterns which are intended to let you see the structure of individual pixels, and the effect that has on the overall quality of the display. On many devices, the display will be utterly uninteresting
Chime Timer Chime Timer is a simple, configurable timer app, with nice chime sounds. It lets you create up to four timer configurations, each of which can have a pre-timer, a start bell, and an end bell.
Chime Timer keeps running in the background even if you navigate away to some other app; so you can play Scrambled Net, for example, while you're waiting for whatever it is
