Zevele's Blinker - This application blinks the device LED every few seconds. The idea is to have some notification that the device is still alive.
· Blink the LED every few seconds. If the battery level is below the threshold, orange led is blinking otherwise the green on is used.
· If the radio is turned off or there is no signal, another orange blink occurs (in addition to the regular one).
· When the phone is charging the orange LED lights constantly, every few seconds a sequence of green blinks according to the batter level occurs (20-40% - 1 blink, 40-60% - 2 blinks, 60-80% - 3 blinks and 80-100% - 4 blinks). If the battery is fully charged - the green led lights constantly.
· Blink interval and length can be set via the registry.
· Running the link once starts the application, on blink sequence occurs. Running the link again shuts the application, off blink sequence occurs.
· Blink sequence for the normal, low battery, no-signal, on and off blink sequences can be set via the registry
What's New in This Release:
· Fixed issue where Blinker halts at midnight.
What's New in 1.6:
· Fixed issue where custom LED id's were not saved.
What's New in 1.3:
· Blinker can now use the notification system instead of directly check the Stores. This can be configured in the setting, under "Use WM Notifications".
· Blinker can be configured to load on startup from the settings window.
· Improved performance.
· Some minor interface improvement to the settings dialog
What's New in 1.2:
· Added possibility to set the green/orange LED id.
· Added possibility to set the SMS store name.
· Improved error handling in case SMS store is not found
What's New in 1.1:
· Added notifications for new message (SMS/EMail/Voice), missed calls and wireless status.
· Added possibility to blink the keypad light as-well.
· Added separate delay interval on new message or missed call.
· Tweaked the unattended mode. The halting problem still exists, but it seems better now.
· Added a configuration utility. To run it press the Blinker shortcut again (after blinker is already running).
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
IndicatorTemperature IndicatorTemperature displays the temperature of the PocketPC battery on the title bar of any running PocketPC application. Select degrees Celsius/Fahrenheit and the program will report on the temperature once a second. NOTE: Some PPC's don't have thermistors. (0 Value)
Battery Monitor Battery Monitor - Battery power information is an essential feature on the PocketPC and very important for people depending on their PocketPC''s, and not only.
You no longer have to worry about how much your battery will last, or go through the entire Control Panel just to see the percentage of remaining power
VibrateBattery VibrateBattery alerts you via vibration when the power level is below the selected alert level. Select the alert level and run this program in the background. When the power reaches the minimum value the program will alert you via vibration
BattLog Battlog is a simple utility that logs the battery performance. Use it to troubleshoot when and under what conditions the PPC uses the most power. The program provides a rolling graphical display of the latest data (Voltage, Current, and Temperaure) as well as saving additional information into the log file. Log entries can be recorded at 1, 5, and 10 sec intervals
System Resources At Glance System Resources At Glance
» Benefits
Track the current status of your device from wherever you are. See how battery and memory states change while working with different applications. Keep an eye on free memory and remaining battery power.
» Customize
Once installed, you may adjust the Menu to your needs
PDAStatus PDAStatus is small plugin for Windows Mobile 'today' screen
BattBench .NET BattBench .NET - This little tool does nothing but measure how long last the main battery of your device.
You can run the test measuring how long take the battery level to go down for a few % and based on that time the programs calculates how long will take to go from 100% to 0 considering that the battery life vs time is a lineal function
acbPowerMeter acbPowerMeter-this utility is very light-weight, allowing benchmarking of your battery usage. With it you can:
- Measure how much power your cellular or WiFi radio consumes.
- Chart the power usage of bluetooth connections, both idle and active.
- Test your favorite screen-saver.
- Tweak your backlight and see the effect on battery life
BatteryGrapherer BatteryGrapherer allows you to view your PocketPC battery power levels on a customizable graph interface. You can set the number of seconds between each reading. The program displays a graph of the battery power and the actual power level
Other Software by developer «Zevele»:
Zevele's SimplePiano Zevele's SimplePiano - A simple piano application for Windows Mobile.
· WVGA, VGA, QVGA, HVGA versions.
· It has three octaves.
· Record and Playback.
· Dualtouch via the PinchToZoom events
· Customizable skins.
· Customizable sounds (currently include Piano, Acoustic Guitar & Violin)
Zevele's AutoLoudspeaker AutoLoudspeaker is an application that will automatically turn on the loudspeaker when the phone is away from the ear, and turns it off when it is near the ear.
AutoLoudspeaker is fairly simple to use. When running the application a service starts. If the shortcut is pressed again, a notification message pops and the user can choose to close the service