DHD Proximity Sensor Recalibrator Due to many DHD's being incorrectly factory calibrated with regards to the proximity sensor, this little app was written to allow one to change the calibration on-the-fly and persist it over reboots.
This app is specifically for those experience issues with the proximity sensor.
Well known symptoms include the following:
- Screen fails to turn off when holding to face on a call
- Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery
These problems are common in custom kernels/ROM's. HTC has addressed this issue however in their kernels from 1.32 onwards, but have failed to release Linux kernel source code for any new versions (latest source is pre-1.32).
Usage:
1. Install app.
2. Run app.
3. Press the toggle button to start monitoring.
4. Move your finger over the proximity sensor (the little LED next to the front facing speaker).
5. Adjust the High and Low threshold values to your liking.
For those whose screen does not turn off, it probably means the factory values are set too high.
For those whose screen does not turn back on, it probably means the factory values are set too low.
The setting will be saved, and will be applied every time you reboot your phone. No need to go through any of the steps unless you want to change the calibration. When the settings are applied at boot time, you will get a toasty indicating the calibration value applied.
Removal:
If for whatever reason you find the application does not work, or you do not want it anymore, just uninstall the app, and reboot. Your original factory settings will be in effect again. This application does not modify your system and does not require root rights.
What's New in This Release:
· Fix issues with sensor listener not getting disabled
What's New in 1.8:
· Correct boot permissions for ICS
· Prevent app from being installed on SD card (which will cause issues)
What's New in 1.6:
· Added support for calling 'su' when permissions are wrong.
What's New in 1.5:
· Only for CM7 users. Use nightly 92 or above. This includes the necessary kernel patch.
· Should work on SENSE with custom kernel. Apply patch (or ask your kernel 'builder' to do so).
· Removed Beer button due to paypal policy...
What's New in 1.4:
· Added some alert dialogs to aid with the problems people are experiencing. (In case of error, please note both the title text, and the first few lines in the text of the alert dialog.)
What's New in 1.3:
· Add some better handling when something goes not as planned (likely on non-DHD hardware)
What's New in 1.2:
· Removed amount from Paypal, feel free to donate whatever you feel like
Like it? Share with your friends!
Supported operating systems:
Google Android 1.0, Google Android 1.5, Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
Batman Torch Free Batman Torch Free - This app allows you to set brightness value and to turn flash on while showing a wonderful Batman signal animation.
Languages: English, Italian, French, German, Russian.
Tested on:
- Galaxy S2 with Android 4.0.3
- Android Jelly Bean 4
Brightest FlashLight This app is converts your mobile into brightest flashlight.Flashlight helps you a lot to make your life comfortable and helps you in lots of situation e.g. hacking etc
TeslaLED TeslaLED - TeslaLED is a LED flashlight app for many phones
Firmus Utility Firmus Utility - Free version of Firmus Utility. Includes all the same features as the pro version, but with ad's. This application allows you to use the torch feature of your phone. It includes both battery and torch widgets. This application also includes a barcode scanner that can send barcode data to a host computer over Bluetooth or WiFi
Ostrobar Flashlight Ostrobar Flashlight - This is a simple flashlight application for Android. You can easily use it in the dark.
Simply, tap on the screen to turn the flashlight on. Tap it again to turn it off. You can also set a light color is settings
Free LED Display Free LED Display - This app allows You to use Your phone or tablet as a scrolling LED display. Just write Your message, select color, font and speed and let run Your message on the whole display.
But this is not all
Quick Flash Light Quick Flash Light - use your device's camera flash / screen as a torch * Turn ON Flash LED at Maximum on a click * Turn ON and Turn OFF the Flash LED like using real torch. * Also shows the battery level. * Simple and cool UI design
Brightness Level A widget/app which allows you to easily change screen brightness
