TiltLander is a simple project to demonstrate accelerometer use in Android. It's just the Android Lunar Lander demo, with the accelerometer hooked up to control the tilt of the lander.
How to play
You have to land the lander on the landing pad, which is shown as a green line at the bottom of the screen. (The actual position changes at random.) Sounds easy, but:
* You must be moving slowly -- see your speed at the top middle of the screen
* You must be reasonably level
* You must be completely on the landing pad
You can control your descent by firing your engine. The engine always pushes you in the direction you are pointing, so by tilting the lander, you can also control your side-to-side movement. But watch out -- fuel is limited. Your fuel state is shown at the top left of the screen.
You can fire the engines by pressing the trackball button or touching the screen; control the angle of the lander by tilting the phone. But note: rotating the lander does nothing in itself; to move sideways, you need to point in the direction you want to go and fire the engine.
What's New in This Release:
· Allow install to SD card.
Like it? Share with your friends!
Supported operating systems:
Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
user.conf Creator user.conf Creator - This application allows you to create your user.conf/userinit.sh files without the need to edit complicated files. Simply plug your values into the app and it will create the necessary files for you and push them to the proper location.
For now, works for Cyanogen 3.6.8x+, Cyanogen 4.1.99+ and OfficialDonut. See help for details
Calibrator Calibrator works out your Android phone's capabilities and what software it supports. You can also review your phone and tell everyone what you think of it so others can find it helpful. This is a reworked version of Calibrator for J2ME
DevCheck: Hardware and System info DevCheck - gather full information on work of your device. With this application you will get complete access to the information about the system of your smartphone. However, it's not just a collection of data. You can monitor your system in a real time mode, learn much new about it and even find out possible reasons of troubles in a smartphone work
Space Tracker Ad For users who like to upload download transfer files frequently, finding whether there are enough space on sdcard or phone is monotonous affair. Using the default Settings app provide that info but this widget app go further
SGS Tools SGS Tools is an app which contains useful functions specially for the Samsung Galaxy S.
It can do the following things:
• Secret codes list (Don't worry clicking around, there will appear a popup if you have selected factory/hard reset )
• System clean up: this means you can delete all system apps you don't like with 1 click. It will remove the .apk, the
Powerful System Monitor Powerful System Monitor - is a system monitor which gives the information on all components of your device. The application shows current state of the battery, RAM and system memory. It is tracking frequency and temperature of the processor in real time mode and supports monitoring of multi-core chips
App Control App Control is a tool that displays detailed information about apps present in your device.
App Control is very easy to use, just click on the desired app to get detailed information about it. See how much storage space your apps are using. App Control can even identify uninstalled apps that are still using precious storage space
CPUStats CPUStats - A simple app which shows some info about CPU frequencies and governor.
What's New in This Release:
· Changed startup screen, and now you can even disable it!!
· Changed logic that interacts with system, so it should have faster startup and less CPU usage. Because of this, it will ask root permission again!
· Included cpufreq_stats
Light Flow Light Flow - is a system application which can extend notification functionality. You can set vibration samples depending on the type of a notification. The application gives an access to light indicatorsettings. Select a unique configuration for each application
Görev Yöneticisi Görev Yöneticisi - Bu uygulamayı kullanarak telefonunuzun performansını arttırabilirsiniz.
Görev Yöneticisi uygulaması ile, telefonunuzun arka planında çalışan uygulamaları yönetebilir ve sonlandırabilirsiniz. Bu sayede telefonunuzun performansını arttırabilirsiniz
Other Software by developer «Moonblink»:
Audalyzer Audalyzer is a simple audio analyzer for Android. It displays sound readings from the microphone as a waveform display, as a frequency spectrum, and as a dB meter. dB levels are relative to the maximum input level of your device
Tricorder Tricorder - A simple tricorder simulator for Android powered phones, using real sensors to detect magnetic fields, gravity, etc. See the passing gravity wave from a distant collapsar on your phone screen (actual device sensitivity may be insufficient to detect gravity waves). Detect buried powerful magnets! Be a mega-geek! Etc
ScrambledNet Lite (Android) ScrambledNet is a port of the KDE game "knetwalk", by Andi Peredri, Thomas Nagy and Reinhold Kainhofer.
The player is given a network diagram with the parts of the network randomly rotated; he/she must rotate them to connect all the terminals to the server.
· Portrait and landscape modes are handled
TouchTest TouchTest is a simple Android application to test screen parameters and multi-touch.
The application displays a 50-pixel grid which illustrates the screen sizes, and edge markers to check the registration of the screen edge with the surrounding bezel
Touch Test Touch Test - Shows display parameters, multiple touch points, and trails to let you see how linear your touchpanel is. Different hardware supports 1, 2, or more fingers -- see which yours is. Note Android before 2.0 supported only single touch. Please see the help for more info
TestCard TestCard is a simple screen test pattern for Android devices.
The app displays test patterns which are intended to let you see the structure of individual pixels, and the effect that has on the overall quality of the display. On many devices, the display will be utterly uninteresting
Scrambled Net Scrambled Net - NEW: personal high scores, animations, and auto-solver. See menu to turn animations off. You are given a computer network with the connections all scrambled; rotate the tiles to connect all the terminals to the server. See if you can make your way through the 5 difficulty levels. Please see the in-game help
Test Card Test Card - A very simple screen test card for Android. Designed to allow you to view the structures of pixels under magnification. On many phones this will be totally uninteresting; on some, notably AMOLED displays, it may be more useful. Please read the help for more info
Substrate Live Wallpapers A set of live wallpapers, each displaying a slowly changing pattern which gradually evolves in your home screen
