AutoLoudspeaker is an application that will automatically turn on the loudspeaker when the phone is away from the ear, and turns it off when it is near the ear.
AutoLoudspeaker is fairly simple to use. When running the application a service starts. If the shortcut is pressed again, a notification message pops and the user can choose to close the service. As long as the service runs the loudspeaker will automatically switch on if the proximity sensor is unblocked and off if it is blocked (only during an active phone call).
· Switch the loudspeaker according to the proximity-sensor or g-sensor.
· Answer an incoming call by gesture (wave your hand in front of the proximity-sensor).
What's New in This Release:
· Add ability to automatically answer a call when the proximity sensor is blocked (altec1000's request). This feature can be set by selecting the "Block" gesture in the settings window. The gesture first waits for the sensor to be unblocked for a certain amount of time, after which it checks that the sensor is blocked for a second period of time - only if both periods were fulfilled AutoLoudspeaker will answer the call. Two registry keys were added: BlockGestureOpenDelay - Sets the minimum period (in msec) the sensor has to be unblocked before checking the block status. BlockGestureBlockDelay - Sets the minimum period (in msec) the sensor has to be blocked before answering the call.
· Add command-line controls (to Start/Stop the service). Two commands are available: quit - Stops the service. update - Force AutoLoudspeaker to reread the settings from the registry.
· Changed the notification behavior. Now pressing the notification immediately brings the Settings application.
· I've included the proximity-sensor registry keys of Omnia2 reported by O2amksin.
· Some minor code and gui changes.
What's New in 1.5:
· Reverted to the polling method of v1.3 for the Proximity-Sensor (it just works better). This should also solve the exception on devices with no proximity sensor.
· Fixed issue where AutoLoudspeaker failed to create a shortcut in a non-English localizations.
· Fixed issue where the notification icon remained visible when the service was closed from the settings application.
· Fixed an issue where the delay occurred also before turning the speaker off (instead of just before turning it on).
· Added a short vibration before changing the loudspeaker state. The vibration length can be set via the registry value: HKCU/Software/AutoLoudspeaker/VibrationLength (default: 20ms). The vibration LED index can be set via the value: HKCU/Software/AutoLoudspeaker/VibrationLED (default: 1 - this is the one for the HD2).
· If proximity sensor is not detected (it's registry keys are missing) the possibility to select the proximity method is disabled in the settings application.
· Some performance improvement for the "managed service" code
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
VoiceQuestionnaire VoiceQuestionnaire - This program allows you to make a set of questions and the person has to answer with their voice. The answers are stored in 'wav' file format on your PocketPC.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
VoiceEmaild VoiceEmaild is a voice recorder that sends the wave files via Email in real time. Set the Email account service to use and the Email address to send the emails to. To record your voice tap the record button and again to stop the recording. The wave file will be sent via Email attachment. NOTE: If you are offline the program will place the wave file in the OutBox
EvidenceLogger EvidenceLogger - This program is for police to log the evidence found at the crime scene.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
DiversionNoise DiversionNoise - This program allows you to record a sound diversion and set a timer to play it back on your computer.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
VUAlarmDialer VUAlarmDialer is a sound level VU meter that dials the preset number you set when the sound level is over the selected range. Tap the button to start the VU meter and adjust to the maximum setting. When the sound in the room is over the range (sound detected) the program will dial the number
PlayIt! PlayIt! is a Windows Phone 6.5 Titanium plugin to control and display the status of S2P or Nitrogen.
PlayIt! is the continuation of CS2P
VUAlarm VUAlarm converts your PocketPC into a sound activated decibel siren. You can adjust the sound threshold via the slider and adjust to the current meter readings. When the meter reading is above the current sound threshold settings the program starts a piezoelectric siren
WakeupButton WakeupButton - This program can be used to wake up a person. It plays a soothing sound that can wake a person up from sleeping.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
VoiceGZIPed VoiceGZIPed allows you to make compressed GZIPed voice notes with a counter and prefix. Each time you make a voice note the wave file name is named as the current number count and when you stop recording the wave file is GZIPed. The GZIP compression is from Gzip
Other Software by developer «Zevele»:
Zevele's Blinker Zevele's Blinker - This application blinks the device LED every few seconds. The idea is to have some notification that the device is still alive.
· Blink the LED every few seconds. If the battery level is below the threshold, orange led is blinking otherwise the green on is used
Zevele's SimplePiano Zevele's SimplePiano - A simple piano application for Windows Mobile.
· WVGA, VGA, QVGA, HVGA versions.
· It has three octaves.
· Record and Playback.
· Dualtouch via the PinchToZoom events
· Customizable skins.
· Customizable sounds (currently include Piano, Acoustic Guitar & Violin)