AutoActiveSync - Installation Note: Install 2.5 and then unzip 2.5.2 and copy to program files folder (before that stop service and exit configurator!).
AutoActiveSync is a software to auto-connect via BT when in range of Bluetooth cradle (your device could be on or suspended).
There are two settings:
• first: select device from list (device must be paired – this device is computer with ActiveSync profile)
• second: select interval of searching (in suspend and in powered on mode) – this settings are in milliseconds. Please don’t set less then 15000 (15 sec)! Remember that less value cause your device to more often wake up from suspend to unattended mode and check for device if is in range (this could drain battery).
How does it work? It is looking for some system states before looking for specified by user BT cradle and allowing to connect:
• device can’t be connected to cradle (any other connection by USB or manual via BT will be detected)
• device can’t be connected to BT A2DP or BT Hands Free (this is to prevent of audio interruptions)
• device must be charged over “VeryLow” state (I think this is around 20%) or being connected to charger
Usage. After installing please run AutoActiveSync from start menu (this is only configurator - you must configure it before first usage). Then just run the service (on first tab). After restarting device service will autostart (via startup folder in Windows directory). Please note, that application can crash before accepting usage of unsigned dll's!
Warning! Remember, that not only searching for device via BT could drain your battery. When ActiveSync is connected via BT and device is in suspend mode in real it is unattended mode. It mean, that for example CPU is working normally (not in deep suspend) and draining battery.
Registry. This software store settings in registry, right here: HKCU/Software/AutoActiveSync
What's New in This Release:
· Bug fix for scheduling (now tested) and new feature - allow enable wifi using Comm Manager when autodisabled after connecting to A2DP or ActiveSync.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
Dialer-X Dialer-X is an Advanced Dialing assistant application that makes dialing Calling Card Type Calls & IVR System DTMF easy and convenient, while also handling Number changes automatically when roaming
ToneCodes ToneCodes - This program can be used for touch tone services. Tap on the entry to enter the tone password.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Caller ID Caller ID for smartphones-
Finally, real Caller ID for your mobile phone! If you're thinking, "I already have Caller ID on my mobile phone," you're only partially correct
PhoneNumber PhoneNumber - This program can be used when you have a 'word' phone number. Enter the phone number letters and tap the button to find out the real numerical phone number.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
DtmfAnsweringMachine DtmfAnsweringMachine - DtmfAnsweringMachine allows you to check your home phone's answering machine or voice mail.
To use the app, first set the phone number for your voice mail or answering machine, and the DTMF code. After pressing the button, the application will dial the configured number and then it will send the DTMF PIN code tone
DTMFButton DTMFButton - DTMFButton is a multipurpose DTMF dialer. You can use this when you have to 1) Redial a number to get an outside line 2) Call a contact 3) Give a DTMF code etc. You set the number and # or * codes. When you tap the button the program will send the code via DTMF
DtmfPhoneBalance DtmfPhoneBalance - DtmfPhoneBalance allows you to quickly check your prepaid phone plan balance.
To use the app, enter the phone number to dial and the DTMF menu buttons to find out your balance. After pressing the button, the application will dial the number and send the DTMF tones
Call Rejector Reject unwanted calls or advertisement calls
Personalizer Personalizer will change the operators name everywhere on your device. It will survive a softreset. It has an icon called "Personalizer" in the programs menu so you can change it whenever you want. There is now an option to stop the change if you want as well
Other Software by developer «dmkpoznan»:
not found
Comments on AutoActiveSync:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
AutoActiveSync is compatible with your device Gigabyte Gsmart S1200
