Auto Light lets you customize the different levels of brightness according the the environment. You just need to choose the brightness level (from 1 to 10) and set the limits of the sensor to the change the level. It is supposed to be better auto adjuster of the backlight for your phone.
Install
Run AutoLight.cab and install in main memory (not in storage card), run AutoLight.Config.cab and install where you like, then softreset (this should also disable the native auto adjust backlight function, check for that in the Control Panel Power applet).
If you have previously installed autolight V2.x and want only upgrade to V2.3 without having your configuration reset to default use the Configurator to stop AutoLight. After that overwrite AutoLight.exe, ChangeLight.exe and AutoLightConfig.exe with the files you find inside AutoLight.zip and softreset.
Configurator
AutoLight working depends on parameters it gets from registry. For details on parameters see AutoLight.reg.txt and AutoLigth.reg
The Configurator gives a more user friendly access to these parameters.
Nevertheless, the configuration process is quite complex and should be done after thoroughly reading AutoLight.reg.txt.
The second tab of the Configurator contains a graphical representation of the calibration table used to convert light sensor to backlight values. Note that: - the horizontal scale is not linear but goes according to square root of the light sensor value;
- the horizontal red segments represent the ranges of light sensor values assigned to every backlight level;
- the horizontal red segment whose backlight level is selected (with the control on top of the second tab) turns blue;
- the small rectangles connecting the segments are the hysteresis;
- the vertical blue line is the current light sensor value (only available when AutoLight is running);
- the horizontal blue line is the current backlight level (only available when AutoLight is running).
User offset change and increment/decrement backlight command line utility
If you are not satisfied with the backlight level as computed by AutoLight you can add a positive or negative offset to it. The offset values, one for use when on battery and one for use when on AC power, can be entered using the Configurator. Moreover, installation puts the small utility ChangeLight.exe together with AutoLight.exe. Running ChangeLight.exe with parameter "/-" decrements backlight level by one, with parameter "/+" increments backlight level by one. The utility then adjusts current offset level accordingly. Using ChangeLight.exe and a hardware button mapper you can change backlight and offset without using the stylus.
If you do not use ChangeLight.exe you can safely delete it.
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional
CEBeans ChristmasTree CEBeans ChristmasTree - This program displays a Christmas tree with flashing lights on your PocketPC computer.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
SmartLight Automatic Backlight Tired of the display backlight going out when you are looking at the screen - e.g. while thinking about the right word for an sms? Wouldn't it be nice if your phone knew when you needed the light and when not? SmartLight does just that: Once you have opened an application, the backlight stays on - until you close or hide the application, switching the light off automatically
Backlight Timeout Fix Backlight Timeout Fix-Tired of the 10 seconds backlight timeout bug on htc prophet? Copy this file anywhere on your device and create an autostart entry. You can define a new backlight timout value (in seconds) on the commandline of neo_backlight_fix.exe. Example:
windowsneo_backlight_fix
BarColour BarColour - This program displays a colour code when you are in a bar to let people know what you are looking for.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
Keylight Activate / Deactivate the keyboard LEDs on Treo 700w/750v, HTC TyTn, MDA Pro, MDA III and others
SamsungBacklight SamsungBacklight - Tool for easier backlight switching. Any level (1 to 6) can be set via shortcut, 3 predefined levels (MIN/MID/MAX) and TOGGLE option in Programs/Backlight menu. These shortcuts can be easily assigned to a key. Run "SamsungBacklight.exe X" where X is number 1-6 or T for toggle
Screen Off Screen Off - This application simply turns off the screen on the device, without putting it to sleep. Can be useful to save battery life when connecting the device to the PC or when running an application that doesn't need the display (like an audio player).
Tested on HTC Touch HD with WM 6.1 and 6.5.3.
It DOES NOT require .NET Compact Framework
Pocket Flashy Pocket Flashy-this 15 KB utility can help your friend identify you in a dark big party hall. Just Start the application and it will start flashing in various colours in the client area of the screen. Just a touch with your finger on the screen will stop the flash. Touch again to continue the flash
SoftNest discoSTROBE SoftNest discoSTROBE - The most stupid Application in the world
This Application simulates a Disco Strobe with various speeds (including random) and random optional colors.
Now you can simulate a Disco with your device, just put your favorite dance music, turn on discoSTROBE and have fun.
FREE $19
Comments on Auto Light:
Comments not found
If you noted an error or download link is broken, please, report it via this page or use comments.
Auto Light is compatible with your device Gigabyte GSmart i120
