Categories: Multimedia & Graphics, System Utilities
Upload date: 21 Jan 11
Developer: Zevele
License: Freeware
Downloads: 6221 File Size: 343 Kb
AutoLoudspeaker is an application that will automatically turn on the loudspeaker when the phone is away from the ear, and turns it off when it is near the ear.
AutoLoudspeaker is fairly simple to use. When running the application a service starts. If the shortcut is pressed again, a notification message pops and the user can choose to close the service. As long as the service runs the loudspeaker will automatically switch on if the proximity sensor is unblocked and off if it is blocked (only during an active phone call).
· Switch the loudspeaker according to the proximity-sensor or g-sensor.
· Answer an incoming call by gesture (wave your hand in front of the proximity-sensor).
What's New in This Release:
· Add ability to automatically answer a call when the proximity sensor is blocked (altec1000's request). This feature can be set by selecting the "Block" gesture in the settings window. The gesture first waits for the sensor to be unblocked for a certain amount of time, after which it checks that the sensor is blocked for a second period of time - only if both periods were fulfilled AutoLoudspeaker will answer the call. Two registry keys were added: BlockGestureOpenDelay - Sets the minimum period (in msec) the sensor has to be unblocked before checking the block status. BlockGestureBlockDelay - Sets the minimum period (in msec) the sensor has to be blocked before answering the call.
· Add command-line controls (to Start/Stop the service). Two commands are available: quit - Stops the service. update - Force AutoLoudspeaker to reread the settings from the registry.
· Changed the notification behavior. Now pressing the notification immediately brings the Settings application.
· I've included the proximity-sensor registry keys of Omnia2 reported by O2amksin.
· Some minor code and gui changes.
What's New in 1.5:
· Reverted to the polling method of v1.3 for the Proximity-Sensor (it just works better). This should also solve the exception on devices with no proximity sensor.
· Fixed issue where AutoLoudspeaker failed to create a shortcut in a non-English localizations.
· Fixed issue where the notification icon remained visible when the service was closed from the settings application.
· Fixed an issue where the delay occurred also before turning the speaker off (instead of just before turning it on).
· Added a short vibration before changing the loudspeaker state. The vibration length can be set via the registry value: HKCU/Software/AutoLoudspeaker/VibrationLength (default: 20ms). The vibration LED index can be set via the value: HKCU/Software/AutoLoudspeaker/VibrationLED (default: 1 - this is the one for the HD2).
· If proximity sensor is not detected (it's registry keys are missing) the possibility to select the proximity method is disabled in the settings application.
· Some performance improvement for the "managed service" code
Like it? Share with your friends!
If you got an error while installing Themes, Software or Games, please, read FAQ.
Supported operating systems:
Windows Mobile 2003, Windows Mobile 5.0, Windows Mobile 6 Classic, Windows Mobile 6 Professional, Windows Mobile 6.1 Classic, Windows Mobile 6.1 Professional, Windows Mobile 6.5 Professional
Similar Software:
MicrophonePC MicrophonePC converts your PocketPC into a microphone for your desktop PC computer. Connect the speaker input jack the headphone jack and tap the button to enable the microphone. The program also has a slider that you can use to adjust the power out level of the amplifier. NOTE: Make sure your PC speaker input is compatible with your headphone jack
VoiceTimers VoiceTimers - This program allows you to make voice notes and set a timer limit on them. Select 'start record' from the toolbar and enter the number of seconds to record the voice and the program will stop recording when you tap the stop button or the time limit is reached.
This program requires that you have both the 'BeanDLL
TrickerTreater TrickerTreater - TrickerTreater is a simple app that plays a "Trick or Treat" wav sound. Good for Halloween.
TrickerTreater requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
AudioRoute AudioRoute - This tool that can be used to route the audio from the earpiece speaker to the backspeaker and vice versa.
A good addon for VoIP utilities
MeetingNotes MeetingNotes - This program allows you to record the notes for a meeting into your PocketPC computer.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
MicrophoneQuality MicrophoneQuality is an work/educational tool that allows you to find out what your voice or the sound in the room sounds like at a selected sound sampling frequency (Hz). Adjust the slider from 1 Hz to 44,100 Hz. The program takes the input of the PocketPC microphone (at the selected quality level) and sends the output to the speaker. The program also has volume options
VocalCrank VocalCrank allows you to compose crank phone calls with a voice disguiser. Tap 'Record' to record your message and replay it at the selected speed (- for spooky or + for fast) Enter the phone number and tap the button to replay your crank. NOTE: It is illegal to use this program in some countries
RandomBeat RandomBeat - RandomBeat is a simple program that allows you to generate random beats.
RandomBeat requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
BtMusic If you have a bluetooth headset, then BtMusic will redirect all your audio to the wireless headset
LSD 2005 Digital metronome and recorder in one!...
Other Software by developer «Zevele»:
Zevele's Blinker Zevele's Blinker - This application blinks the device LED every few seconds. The idea is to have some notification that the device is still alive.
· Blink the LED every few seconds. If the battery level is below the threshold, orange led is blinking otherwise the green on is used
Zevele's SimplePiano Zevele's SimplePiano - A simple piano application for Windows Mobile.
· WVGA, VGA, QVGA, HVGA versions.
· It has three octaves.
· Record and Playback.
· Dualtouch via the PinchToZoom events
· Customizable skins.
· Customizable sounds (currently include Piano, Acoustic Guitar & Violin)
