ProgressLUX is a light meter that shows the light level in the room on a graphical progress bar and a Lux reading. Simply start the app and it will display the light level in real time. The program works on Samsung Omnia Lite, Omnia Pro, Armani, Omnia II, SCH i920, Omnia II, T-Omnia II, Jack, Intrepid and Oz Omnia
RulerGPS - This program allows you to calculate the distance in Miles, Feet, Inches, KM, Meters and CM based on two latitude and longitude points. This can be used as a ruler for construction etc. with GPS.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
ScrewGuide - This program is a reference to the types of screws and screwdrivers for wood and metal.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer. Simply unzip the file for your processor and place the DLL file in the 'Windows' folder of your PocketPC computer
CaliperRuler - This program allows you to make measurements with your PocketPC. You must align the ruler first then use the slider to adjust the size of the 'calipers'.
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
Electrical Engineering Guide - EE Guide for the following: -Resistor Color Guide -Inductor Color Guide -Logic Gates w/Truth Tables -4000/7400 IC Family List & Description -Ohms Law Equations Will work with most PocketPC Devices that supports the DotNET Compact Framework. All CPUs supported are included in the download file
BlueprintViewer - This program allows you to pan a large blueprint on the display of your PocketPC computer. (NOTE: The bitmap must be in 256 colour format)
This program requires that you have both the 'BeanDLL.dll' file ** and ** the runtime files for Visual Basic on your PocketPC computer
S-Calc for the Pocket PC - Using S-Calc on your Pocket PC you will be able to transform and rotate co-ordinate systems from one base to another, instantly perform setting out (inverse) calculations on data produced or pre-loaded into the Pocket PC
Modbus Master - The Modbus Master program allows you to communicate with one or more Modbus devices connected to the serial port or ethernet network port of your Pocket PC. With a suitable RS232 to RS422/485 converter, you can configure the program to communicate with up to 10 devices at the same time if you are using a multidrop connection
Modbus Slave - The Modbus Slave program allows your Pocket PC to emulate up to 10 Modbus slave devices which can communicate with another Master device connected to the serial port or ethernet network port of your Pocket PC. The Master device can be a PLC, a SCADA system or any other device or piece of software which runs as a Modbus Master
