Categories: Multimedia & Graphics, System Utilities
Upload date: 10 Jun 11
Developer: Moonblink
License: Freeware
Downloads: 10600 File Size: 295 Kb
Audalyzer is a simple audio analyzer for Android. It displays sound readings from the microphone as a waveform display, as a frequency spectrum, and as a dB meter. dB levels are relative to the maximum input level of your device.
Since microphone sensitivity varies between individual devices, let alone models, it's impossible to generate accurate sound level readings with this app; so all data should be taken with a pinch of salt. Still, it may be interesting when used to compare sound readings at different locations.
· Displays waveform, frequency spectrum, and dB meter.
· Meter shows instantaneous, average, and peak values.
What's New in This Release:
· Thanks to Ozneb, who added a Sonagram display, and the ability to switch between multiple instrument configurations.
What's New in 1.14:
· Allow install to SD on Android 2.2.
Like it? Share with your friends!
Supported operating systems:
Google Android 1.6, Google Android 10.x, Google Android 2.0, Google Android 2.1, Google Android 2.2, Google Android 2.3, Google Android 3.0, Google Android 3.1, Google Android 3.2, Google Android 4.0, Google Android 4.1, Google Android 4.2, Google Android 4.3, Google Android 4.4, Google Android 5.x, Google Android 6.x, Google Android 7.x, Google Android 8.x, Google Android 9.x
Similar Software:
PingRoid PingRoid is a ping application for Android devices. Ping by host name or IP address. It can indicate any packet loss and other relevant stats as a result of the ping.
If you leave it blank, the app will ping your local IP address
IP Tools IP Tools - a convenient and powerful tool for network analysis.
The program includes the most common tools that you can
found in Windows and Linux.All the need for information about the ip address or website
now in your device
Network Counter Network Counter - count the consumption of Internet traffic byte-for-byte. The application has separatory count depending on the used network. You can see average data consumption per hour, day, month or year
SDcardBenchmark Test the write and read speed of your Android device
RF Signal Tracker RF Signal Tracker - The RF Signal Tracker is an engineering application for doing impromptu hand-held drive-tests with your Android phone. You can monitor the RSSI (received signal strength indication) for the phone as well as the serving cell locations, describe the cell site's zone of coverage, and save or playback that data
DroidBench by Rohan Sharma DroidBench by Rohan Sharma - DroidBench is a benchmarking utility that checks the performance of your Android smartphone by performing a selection of tests. In addition, it shows comprehensive system information about your device
StabilityTest StabilityTest is a stress-testing tool for android devices with error reporting. StabilityTest is a CPU and RAM/memory stress-testing tool like for your device, whether stock and unrooted (limited functionality)
MultiTouch Tester MultiTouch Tester - is a software which will help you test multitouch work of your smartphone. Check how fast screen sensor responses and get the number of maximum simultaneous touches that is supported by your phone. Compare the recieved data with the characteristics stated by the manufacturer
Phone Tester Phone Tester - This Android application allows you to check the correct operation of:
· Device's sensors (accelerometer, compass, ...)
· WiFi (external IP, IP address, gateway, DHCP server...)
· GPS (altitude, latitude, longitude..
Other Software by developer «Moonblink»:
TouchTest TouchTest is a simple Android application to test screen parameters and multi-touch.
The application displays a 50-pixel grid which illustrates the screen sizes, and edge markers to check the registration of the screen edge with the surrounding bezel
TiltLander TiltLander is a simple project to demonstrate accelerometer use in Android. It's just the Android Lunar Lander demo, with the accelerometer hooked up to control the tilt of the lander.
How to play
You have to land the lander on the landing pad, which is shown as a green line at the bottom of the screen. (The actual position changes at random
Touch Test Touch Test - Shows display parameters, multiple touch points, and trails to let you see how linear your touchpanel is. Different hardware supports 1, 2, or more fingers -- see which yours is. Note Android before 2.0 supported only single touch. Please see the help for more info
Test Card Test Card - A very simple screen test card for Android. Designed to allow you to view the structures of pixels under magnification. On many phones this will be totally uninteresting; on some, notably AMOLED displays, it may be more useful. Please read the help for more info
Dazzle Configurable Switcher Dazzle Configurable Switcher - The ultimate switcher bar for your phone. Choose from 4 widget sizes, and choose which controls it shows: ringer, sync, WiFi, BT, GPS, airplane, or brightness with min/max/preset (and auto toggle on some phones). Now with both one-touch and popup controls. WIDGET, NOT AN APP: you have to install it on your home page
Scrambled Net Scrambled Net - NEW: personal high scores, animations, and auto-solver. See menu to turn animations off. You are given a computer network with the connections all scrambled; rotate the tiles to connect all the terminals to the server. See if you can make your way through the 5 difficulty levels. Please see the in-game help
Substrate Substrate - This application contains a collection of live wallpapers for Android. Once installed, you can install any of the wallpapers on your desktop in the usual way. The package also contains a runnable application which previews all the wallpapers and provides access to their settings
ScrambledNet Lite (Android) ScrambledNet is a port of the KDE game "knetwalk", by Andi Peredri, Thomas Nagy and Reinhold Kainhofer.
The player is given a network diagram with the parts of the network randomly rotated; he/she must rotate them to connect all the terminals to the server.
· Portrait and landscape modes are handled
Chime Timer Chime Timer is a simple, configurable timer app, with nice chime sounds. It lets you create up to four timer configurations, each of which can have a pre-timer, a start bell, and an end bell.
Chime Timer keeps running in the background even if you navigate away to some other app; so you can play Scrambled Net, for example, while you're waiting for whatever it is
